Enhance the Quality of Your Home Ventilation by Installing Premium Ventilation System by Heat-On

The domestic use of Ventilation System may be liable for significant load out of total heating and air conditioning, i.e. maybe 20 to 30 percent of the total, and this share could be termed as a major chunk in a building with reduced demand for energy. Now is the time when everyone on earth is planning to phase out the energy-hungry building ideas, it is ideal to utilize the basics of building physics in the best possible ways. This could be a primary passive solar design, along with insulation and building sealing options. By insulating the building, you will be able to manipulate the internal environment of your dwelling. Now it will be your decision to open up the place during favourable conditions and when can plan to control the more stable internal conditions. However, sealing your home also involves the ventilation plan to work properly. In that case, a particular Australian home may not require the need for heating or cooling system.

A typical Australian ventilation system for fresh air generally covers some open windows and some holes or gaps in the building, however, this system seems to be a misfit for Australian homes. An ideal ventilation plan covers variations in pressure and temperature zone, the principle of cross-flow and stack principles to prompt the airflow into and through the home.

A proper ventilation system confirms the availability of healthy and quality air to breathe by removing the CO2, toxins, and adjusting the humidity to human acceptable levels as the high-level humidity welcomes condensation and can lead to some health issues.

Heat-On a series of products for air purifications for Australian customers to provide them with a quality living place. Apart from just providing the ventilation system, these products are also designed to lower the electricity bills cost by using the Heat Recovery Ventilation technology or simply (HRV). The Brook vent air cycle HRV systems are intelligent and based on a sustainable design that reduces heat loss during air ventilation.

The Heat Recovery Ventilation system regularly removes from wet and humidify rooms, remove the pollutant air and this air will pass on through ducts to make it travel through a heat exchanger where its heat passes to the fresh air and then the same brought into the required rooms. These product ranges are equally suitable for housing units, student accommodations, apartments, day-care setups and old age homes.

These products include the following:

– Aircycle 1.2 HRV

– Aircycle 3.1 HRV

– Air Filters Aircycle 3.1

– Air Filters Aircycle 1.2

These systems are compatible with your requirements, i.e. they could be adjusted to the wall, ceiling, or on the floor. The in-built automatic climate regulation system offers automatic frost protection and humidity controls. For hot regions, the in-built Tempering Summer Bypass works fine on a liner scale range between 68 Fahrenheit Celsius or 20 Degree Celsius to 80 Fahrenheit Celsius or 27 Degree Celsius. The easy DIY maintenance guide only demands a change of filters every 9 to 12 months. The airtight tabs on the front side hold the filter and these filters are replaceable when required.

The heat recovery unit produces significant energy savings by recovering the heat from stale air and transferring it to fresh air.

Get in Touch:

Heat-On, an Australian family-based business offers various options for Heat Recovery Ventilation Systems and Air Filters. We deliver across all the major cities of Australia including Brisbane, Sydney, Melbourne and others. Good thing is that we deliver for free if the order cost will be $400 or more. Give us a call to place your order at
0421 798 594
for head office inquiries, or +61 421 798 594 for any technical support.